Active Standards

The following are active NERC standards as of 2017-07-01

BAL-001-2 – Real Power Balancing Control Performance
BAL-001-TRE-2 – Primary Frequency Response in the ERCOT Region
BAL-002-3: Disturbance Control Standard – Contingency Reserve for Recovery from a Balancing Contingency Even
BAL-002-WECC-3 — Contingency Reserve
BAL-003-2 – Frequency Response and Frequency Bias Setting
BAL-004-WECC-3: Automatic Time Error Correction
BAL-005-1: Balancing Authority Control
BAL-502-RF-03: Planning Resource Adequacy Analysis, Assessment and Documentation
CIP-002-5.1a – Cyber Security – BES Cyber System Categorization
CIP-003-8 – Cyber Security — Security Management Controls
CIP-004-7
CIP-004-7 — Cyber Security – Personnel & Training
CIP-005-7 — Cyber Security – Electronic Security Perimeter(s)
CIP-006-6 – Cyber Security – Physical Security of BES Cyber Systems
CIP-007-6 – Cyber Security – System Security Management
CIP-008-6 — Cyber Security — Incident Reporting and Response Planning
CIP-009-6 – Cyber Security – Recovery Plans for BES Cyber Systems
CIP-010-4 – Cyber Security — Configuration Change Management and Vulnerability Assessments
CIP-011-3 — Cyber Security — Information Protection
CIP-012-1 – Cyber Security – Communications between Control Centers
CIP-013-2 – Cyber Security – Supply Chain Risk Management
CIP-014-3 — Physical Security
COM-001-3 – Communications
COM-002-4 – Operating Personnel Communications Protocols
EOP-004-4 – Event Reporting
EOP-005-3: System Restoration from Blackstart Resources
EOP-006-3: System Restoration Coordination
EOP-008-2: Loss of Control Center Functionality
EOP-010-1 – Geomagnetic Disturbance Operations
EOP-011-4 – Emergency Operations
EOP-012-2 – Extreme Cold Weather Preparedness and Operations
FAC-001-4 — Facility Interconnection Requirements
FAC-002-3 – Facility Interconnection Studies
FAC-002-4 – Facility Interconnection Studies
FAC-008-5 – Facility Ratings
FAC-011-4– System Operating Limits Methodology for the Operations Horizon
FAC-014-3 – Establish and Communicate System Operating Limits
FAC-501-WECC-2: Transmission Maintenance
FAC‐003‐5 Transmission Vegetation Management
INT-006-5 – Evaluation of Interchange Transactions
INT-006-5 – Evaluation of Interchange Transactions
INT-009-3 — Implementation of Interchange
INT‐009‐3 — Implementation of Interchange
IRO-001-4: Reliability Coordination – Responsibilities
IRO-002-7 – Reliability Coordination – Monitoring and Analysis
IRO-006-5: Reliability Coordination — Transmission Loading Relief
IRO-006-EAST-2: Transmission Loading Relief Procedure for the Eastern Interconnection
IRO-006-WECC-3: Qualified Path Unscheduled Flow (USF) Relief
IRO-008-3 – Reliability Coordinator Operational Analyses and Real-time Assessments
IRO-009-2 – Reliability Coordinator Actions to Operate Within IROLs
IRO-010-3 — Reliability Coordinator Data Specification and Collection
IRO-010-4 – Reliability Coordinator Data Specification and Collection
IRO-014-3 – Coordination Among Reliability Coordinators
IRO-017-1: Outage Coordination
IRO-018-1(i): Reliability Coordinator Real-time Reliability Monitoring and Analysis Capabilities
IRO‐002‐7 ‐ Reliability Coordination ‐ Monitoring and Analysis
MOD-001-1a: Available Transmission System Capability
MOD-004-1: Capacity Benefit Margin
MOD-008-1: TRM Calculation Methodology
MOD-025-2: Verification and Data Reporting of Generator Real and Reactive Power Capability and Synchronous Condenser Reactive Power Capability
MOD-026-1: Verification of Models and Data for Generator Excitation Control System or Plant Volt/Var Control Functions
MOD-027-1: Verification of Models and Data for Turbine/Governor and Load Control or Active Power/Frequency Control Functions
MOD-028-2: Area Interchange Methodology
MOD-029-2a: Rated System Path Methodology
MOD-030-3: Flowgate Methodology
MOD-031-3 — Demand and Energy Data
MOD-031-3 — Demand and Energy Data
MOD-032-1: Data for Power System Modeling and Analysis
MOD-033-2 — Steady-State and Dynamic System Model Validation
MOD-033-2 — Steady-State and Dynamic System Model Validation
NUC-001-4— Nuclear Plant Interface Coordination
NUC-001-4— Nuclear Plant Interface Coordination
PER-003-2: Operating Personnel Credentials
PER-005-2: Operations Personnel Training
PER-006-1 – Specific Training for Personnel
PRC-001-1.1 (ii): System Protection Coordination
PRC-002-4 – Disturbance Monitoring and Reporting Requirements
PRC-004-6 — Protection System Misoperation Identification and Correction
PRC-005-1.1b: Transmission and Generation Protection System Maintenance and Testing
PRC-005-6: Protection System, Automatic Reclosing, and Sudden Pressure Relaying Maintenance
PRC-006-5 — Automatic Underfrequency Load Shedding
PRC-006-NPCC-2 – Automatic Underfrequency Load Shedding
PRC-006-SERC-02:Automatic Underfrequency Load Shedding Requirements
PRC-006-SERC-03 – Automatic Underfrequency Load Shedding Requirements
PRC-008-0: Underfrequency Load Shedding Equipment Maintenance Programs
PRC-010-2: Undervoltage Load Shedding
PRC-011-0: UVLS System Maintenance and Testing
PRC-012-2 – Remedial Action Schemes
PRC-017-1: Remedial Action Scheme Maintenance and Testing
PRC-018-1: Disturbance Monitoring Equipment Installation and Data Reporting
PRC-019-2: Coordination of Generating Unit or Plant Capabilities, Voltage Regulating Controls, and Protection
PRC-023-6 – Transmission Relay Loadability
PRC-024-3 —Frequency and Voltage Protection Settings for Generating Resources
PRC-025-2: Generator Relay Loadability
PRC-026-2 — Relay Performance During Stable Power Swings
PRC-027-1 — Coordination of Protection Systems for Performance During Faults
PRC‐004‐6 — Protection System Misoperation Identification and Correction
Testactive
TOP-001-6 – Transmission Operations
TOP-002-4: Operations Planning
TOP-003-4 — Operational Reliability Data
TOP-003-5 — Operational Reliability Data
TOP-010-1(i): Real-time Reliability Monitoring and Analysis Capabilities
TOP‐001‐5 ‐ Transmission Operations
TPL-001-5.1 — Transmission System Planning Performance Requirements
TPL-007-4 – Transmission System Planned Performance for Geomagnetic Disturbance Events
VAR-001-5: Voltage and Reactive Control
VAR-002-4.1: Generator Operation for Maintaining Network Voltage Schedules
VAR-501-WECC-4 – Power System Stabilizer